| NVIDIA® Jetson Xavier™ NX SOM |
3 x NVIDIA® 64-bit Carmel (Dual Core) processor, 1900 MHz384-core Volta and 48 Tensor cores integrated, 1100MHz6 TFOPS (FP16), 21 TOPS (INT8) computingOpenGL 4.6, OpenGL ES 3.2 and Vulkan 1.1260-Pin SO-DIMM form factor compatible with NANO/TX2 NXNVIDIA® JetPack 4.6 |
| Memory |
8GB/16GB 128-bit LPDDR4, 1600MHz |
| Storage |
16GB eMMC 5.1 flash storage, 200 MHz (HS400)1 x Accessible microSD (SDXC, UHS-I)1 x M.2 2280/3080 Key M (PCIe 4.0 x4) NVMe SSD |
| Expansion |
1 x Full-size mPCIe socket (PCIe 3.0 + USB 2.0)1 x M.2 3042/3052 Key B socket (USB 3.0) with 2 x micro SIM slots |
| Display |
1 x HDMI 2.0A/B, up to 3840 x 2160@60Hz |
| G-Sensor |
3D accelerometer and 3D gyroscope, ST LSM6DSLTR |
| Carry |
2-Port GbE, X-coded9Kbyte Jumbo frame, PTP (IEEE 1588) supportController: Intel® I210-IT |
| PoE (for ATC 3530-IP7-4C only) |
4-Port Gbps, X-codedIEEE 802.3af/at compliant30W (4-port) total power budgetPoE on/off and power watt monitoringCover is pre-installed |
| MIPI CSI-2 SerDes (for ATC 3530-IP7-4M only) |
Up to 4 x individual channels (1080p60/720p30 resolution)Your SerDes solution (V-by-One® HS)Integrated with 3rd party MIPI SerDes cameras (IP67 rated)
- 1080p60 CAM: CAM1-MT1080-IP7-15m (P/N: 10AT0108001X0)
- 720p30 CAM: CAM1-MT720-IP7-15m (P/N: 10AT0072001X0) |
| USB |
2 x USB 3.0 (USB 3.2 Gen1), type A
- 5V@900mA each
- Up to 5Gbit/s link speed and USB 2.0 (LS/FS/HS link speed) compatibility1 x OTG micro USB, 2 x USB2.0 wafer type (reserved) |
| Serial Port |
1 x RS232 (Tx, Rx, CTS, RTS)1 x RS232 (Tx, Rx)1 x Console port (Tx, Rx)RS232 operating voltage, ±9V, baud rate up to 115.2kb/s |
| DI/DO (reserved) |
4-Bit input
- Source: 9~36VDC (12V@0.6mA/24V@1.2mA)
- External: 0~33VDC pull-high, high level, 3.3 - 33VDC; low level, 0-2 VDC4-Bit output
- Source: 9~36VDC (nominal 35mA@24V)
- External: 5~27VDC pull-high, sink current with 220mA for each bit, 500mA max (@25C)Source or external selectable by software (default: source type) |
| CAN Bus |
1 x CAN 2.0A/2.0BIEC 61000-4-2 Electrostatic Discharge (ESD): ±8KV/15KV (contact/air)2.5KV isolated |
| Global Positioning System |
U-blox NEO-M8N GNSS module for GPS/GLONASS/QZSS/Galileo/BeidouOptional DR (dead reckoning) function, NEO-M8U/M8L |
| Power Supply |
Nominal voltage: 9~36VCranking voltage: 6V~9V (less than 20 seconds)OCP and UVP (shuts down when exceeding 37V)Ignition on/off control and programmable on/off delay timerOptional for remote power on/off control |
| I/O Ports, Front Plate |
12 x LED indicatorsReset button, 1 x microSD slot, 1 x OTG2 x Micro SIM slots, 1 x HDMI, 2 x USB 3.0 |
| I/O Ports, Rear Plate |
9~36VDC-in, S-coded4 x Fakra Z-coded and 2 x GbE, X-coded (ATC 3530-IP7-4M)4 x GbE PoE and 1 x GbE, X-coded (ATC 3530-IP7-4C)M12 multi-port (2 x RS232 and 1 x console, 1 x CAN) |
| I/O Ports, Side Plate |
2 x antenna holes for Wi-Fi 5/6 modules (PR-SMA ant.)2 x antenna holes for LTE/5G module (SMA ant.)1 x antenna hole for GNSS (RP-SMA ant.) |
| Dimensions and Weight |
213mm x 167mm x 82.8mm (with mounting bracket)2.4 kg |
| Environment |
Operating temperatures: -30°C~70°C (70°C: NVIDIA® Jetson Xavier™ NX@10W, without PoE; 60°C: NVIDIA® Jetson Xavier™ NX@15W, with 30W PoE)Storage temperatures: -40°C~85°CRelative humidity: 10%~95% (non-condensing) |
| Vibration and Shock |
Vibration during operation
- MIL-STD-810G, 514.6C, Procedure 3, Category 4
- IEC 60068-2-64: 2.0 g@5~500 Hz
- MIL-STD-810G, 514.6E, Procedure 1, Category 24, approx. 7.7 gShock
- Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
- Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g |
| Certifications |
CE approval, FCC Class A, UKCA, E13 certified |
| Operating System |
NEXCOM Accelerated Linux (NAL)
- NV Jetpack 4.6/5.1.3 package
- MIPI SerDes CAM Driver
- NEXCOM special functions (GNSS, 5GNR, 6-axis sensor, MCU control)
- V4L2
- Ubuntu 18.02/20.04@Kernel 4.9.140/5.10 |
| External Cable |
Power extension cable, 20cmM12 multi-port adapter cable, 20cm |
