The PB series is a standalone power backup module that can protect your box PC against power interruptions. Using state-of-the-art supercapacitor technology, it can operate in harsh environments from -25°C to 65°C and has extremely high durability of more than 10 years.
The PB-9250J-SA and PB-4600J-SA consist of eight and four 370F/ 3.0V supercapacitors respectively, while the PB-2580J-SA consists of eight 100F/ 2.7V supercapacitors. They offer 9250, 4600 and 2580 watt-seconds of energy respectively to provide extra extended runtime to support your system.
Thanks to Neousys' patented CAP energy management technology, the PB-2580J-SA can reliably deliver up to 70W of power to the back-end system and automatically manage boot-up and shutdown without installing additional drivers/software. In addition to the UPS-like power backup mode, it also offers two advanced ignition control modes for in-vehicle use.
The PB-2580J-SA can work with a standard box PC or in-vehicle controller to provide a stable power supply and execute a user-configurable power on/off delay based on the IGN signal input. With various modes, automatic shutdown control and output power of up to 70W, the Neousys PB series can work with most off-the-shelf box PCs. With features such as maintenance-free energy storage and uninterruptible power supply, the PB series can prevent data loss in the connected back-end system during a power outage in harsh industrial environments!
|
PB-9250J-SA |
PB-4600J-SA |
PB-2580J-SA |
| Supercapacitor Configuration |
| Composition |
8x 370F, 3.0V
supercapacitors |
4x 370F, 3.0V
supercapacitors |
8x 100F, 2.7V
supercapacitors |
| Capacity |
9250 watt-seconds |
4600 watt-saniye |
2580 watt-saniye |
| Expected service life |
>10 years* |
| Life cycle |
500,000 charge/discharge cycles* |
| Power Specifications |
| Input Voltage |
12~ 35VDC |
| Input Connector |
1x 3-pin pluggable terminal block (V+, GND, IGN_IN) |
| Output Voltage |
Charge mode: DC_IN bypass (DC_OUT = DC_IN)
Discharge mode: 12 or 24V** |
| Output Power |
Maximum 180W
output** |
Maximum 100W
output** |
Maximum 70W
output** |
| Output Connector |
1x 3-pin pluggable terminal block (V+, GND, IGN_OUT) |
| I/O Interface |
| COM Port |
1x DB9 for 3-wire RS-232 |
| ISO. TANRI |
1x 10-pin pluggable terminal block for:
- PWR_BTN# output
- SYS_STAT input |
|
PB-9250J-SA |
PB-4600J-SA |
PB-2580J-SA |
| Mekanik |
| Dimensions |
82.5 mm (W) x 175.2 mm (H) x 128.2 mm (D) |
32.8 mm (W) x 176.6 mm (H) x 126 mm (D) |
| Weight |
1.7 kg |
1.68 kg |
0.93 kg |
| Mounting |
DIN-rail mount and wall mount |
| Environmental |
| Operating Temperature |
-25°C ~ 65°C
-40°C ~ 85°C with reduced energy capacity |
| Storage Temperature |
-40°C ~ 85°C |
| Vibration |
Compliant with IEC61373:2010, Category 1, Class B Body-mounted (part of EN50155) |
Operating, MIL.STD-810G, Method 514.6, Category 4 |
| Shock |
Compliant with IEC61373:2010, Category 1, Class B Body-mounted (part of EN50155) |
Operating, MIL.STD-810G, Method 516.6, Procedure I, Table 516.6-II |
| EMC |
EN50155:2007,
CE/FCC Class A, compliant with EN 55032 and EN 55035 |
CE/FCC Class A, according to EN 55032 and EN 55024 |
* To achieve a service life of > 10 years with 24/7 operation at 65°C, please charge the PB-9250J-SA to the 6525J energy level using the 4.8x SuperCAP Life Extension setting (please refer to the user manual for details). When the rated service life or cycle life is reached, the capacity of the supercapacitor may drop by up to 30% and the ESR may increase by up to 100% from the initial values.
** The backup time for uninterrupted operation may decrease when sustaining a back-end system with high power consumption. If your computer accepts only a constant voltage input, please consult Neousys Technology.
*** To ensure that the power backup operation of the PB-9250J and PB-4600J works as intended, if your connected back-end system accepts only a constant voltage input, please contact Neousys Technology technical support.
