Mobile Industrial Computers

  • VTC 7100-BK
  • VTC 7100-BK
  • VTC 7100-BK
  • VTC 7100-BK

VTC 7100-BK

Intel® Atom™ D2550 Fanless In-Vehicle Computer

  • Build-in Intel® Atom™ D2550 1.86GHz processor
  • Support two Ethernet LAN ports
  • Removable SSD tray and CFast slot
  • Optional OBDII in support of SAE J1939 or J1708
  • Support two SIM card sockets
  • PCI-104 socket
  • 9~36V wide range DC power input
  • Smarter power management and low voltage protection
  • Support 4 digital input and 4 digital output
  • Rugged fanless design to meet MIL standard
  • Internal wireless communication (3.5G, GSM/ GPRS, WLAN, BT)
  • Wake on RTC/SMS via WWAN module
Datasheet(PDF) Add to Inquiry
  • Overview
  • Specifications
  • Ordering Information
  • Download
  • Aksesuar

VTC 7100-BK, adopting the high performance processor, Intel® Atom™ D2550, is a new generation of VTC series. In additional to keep the advantage of existing VTC series, it offers dual LAN ports for redundancy, two high speed interface for storage, 2.5" SATA and CFast. The storage is easily accessible from the front side for maintenance concern. Furthermore, it offers the ODBII for heavy duty truck such as SAE J1939/ J1708. With the rich features, VTC7100-BK can satisfy your demand in vehicle applications.

  • Intel® Atom™ D2550 1.86GHz
Main Chipset
  • ICH10R
  • One 204-pin DDR3 1066MHz SO-DIMM slot (up to 4GB)
  • 1 x Mini-PCIe socket (PCIe + USB) for WLAN option
  • 1 x Mini-PCIe socket (USB) for WWAN option
  • 1 x Bluetooth module for option
  • 1 x on board uBlox NEO-6Q GPS module or optional GPS with dead reckoning
  • 1 x PCI-104 socket
I/O Interface-Front
  • 1 x Line-out, 1 x Mic-in (for WWAN CM8000 voice communication)
  • 2 x SIM card socket (selectable)
  • 1 x System reset button
  • 1 x USB 2.0 host type A connector
  • 1 x Power button
  • 1 x CFast with protection cover
  • 1 x Accessible 2.5" SATA II SSD tray
  • 4 x LED's for power, storage, WLAN/ HSDPA and GPIO
  • G sensor
I/O Interface-Rear
  • 1 x 9~36VDC input with ignition and 35W typical power consumption
  • 1 x 12V/4A DC output, SMBus
  • ŒŒ1 x DB26 LVDS interface with 12V and USB2.0
  • 1 x DB9 RS-232 (default) or OBDII (option)
  • 1 x DB9 RS-422/ 485 1 x DB9 female connector for 4 x DI and 4 x DO
    • (Digital Input)
    •     Input Voltage (Internal Type): 5VDC TTL (default)
    •     Input Voltage (Source Type): 0~30 VDC
    • (Digital Output)
    •     Digital Output (Sink Type): 5VDC TTL (default), max current: 20mA
    •     Digital Output (Source Type): 0~30VDC, max current: 250mA
  • 1 x DB15 VGA 2 x USB 2.0 host type A connector
  • 2 x RJ45 with LEDs for 10/ 100/ 1000Mbps Ethernet
  • 1 x Line-out, 1 x Mic-in
  • 1 x SMA-type GPS antenna connector
  • 4 x Antenna hole reserved for SMA-type antenna connector (WWAN/ WLAN/ BT)
Operating System
  • WES 7
  • Win7 Pro for Embedded
  • Linux 2.6
  • WES 2009
Power Management
  • Selectable boot-up & shut-down voltage for low power protection by software
  • Setting 8-level on/off delay time by software
  • Status of ignition and low voltage status can be detected by software
  • Support S3/ S4 suspend mode
  • 260mm (W) x 176mm (D) x 50mm (H) (10.24"x 6.93"x 1.97")
  • 2.3 Kg (5.07 Lb)
  • Aluminum enclosure with fanless design
  • Operating temperatures:
    • -30°C to 55°C (w/ industrial SSD) with air flow
    • -20°C to 45°C (w/ commercial HDD) with air flow
  • Storage temperatures: -35°C to 85°C
  • Relative humidity: 10% to 90% (non-condensing)
  • Vibration (random): 1g@5~500 Hz (in operation, SSD)
  • Vibration (SSD):
    • Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
    • Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test
  • Shock (SSD):
    • Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
    • Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g
Standards/ Certifications
  • CE approval
  • FCC Class A
  • e13 Mark